Flatpak

Pritunl Client Flatpak installation instructions

A Flatpak is available for the Pritunl Client directly from the Pritunl repository. This can be installed with the commands below.

flatpak remote-add --user --if-not-exists flathub https://dl.flathub.org/repo/flathub.flatpakrepo
flatpak remote-add --user --if-not-exists pritunl https://repo.pritunl.com/stable/flatpak/pritunl.flatpakrepo
flatpak install --user pritunl com.pritunl.client

To start the Flatpak client use the icon from the applications menu or run the command below.

flatpak run com.pritunl.client

Device Authentication

To enable device authentication use the commands below to provide TPM access to the Flatpak.

flatpak override --user --device=all com.pritunl.client
sudo tee /etc/udev/rules.d/70-pritunl-tpm.rules << 'EOF'
KERNEL=="tpmrm[0-9]*", SUBSYSTEM=="tpmrm", TAG+="uaccess"
EOF
sudo udevadm control --reload
sudo udevadm trigger --subsystem-match=tpmrm
flatpak kill com.pritunl.client

This can be removed with the commands below.

flatpak override --user --nodevice=all com.pritunl.client
sudo rm /etc/udev/rules.d/70-pritunl-tpm.rules
sudo udevadm control --reload
sudo setfacl -b /dev/tpmrm0

Terminal Interface

The terminal interface can be run from the Flatpak using the command below.

flatpak run --command=pritunl-client com.pritunl.client